Ceramic Coating Product List and Ranking from 7 Manufacturers, Suppliers and Companies

[Case Study] Ceramic Coating with Excellent Non-Stick and Wear Resistance

There are cases where, after several months of use, there is no degradation in performance, and cleaning tasks have become significantly easier than before.

This is a case study from a food company. They were struggling with the burden of cleaning due to product adhesion on molds and transport guides used in the manufacturing process. Among several surface treatments we proposed, they showed interest in a ceramic coating that excels in heat resistance and non-stick properties. After conducting test evaluations, we achieved good results in terms of non-stick performance. As a result, even after several months of use, there was no deterioration in performance, and they were pleased to find that cleaning tasks had become significantly easier than before. [Issues] ■ Excessive material adhesion can lead to defects where products do not meet the specified weight. ■ They had previously adopted fluoropolymer coatings, but these wore out quickly, resulting in low cost-effectiveness. *For more details, please refer to the PDF document or feel free to contact us.

Company：蒲田工業
Price：Other

others
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Surface treatment: Ceramic coating (slip resistance, non-stick properties, wear resistance)

Ceramic coating (slip resistance, non-stick properties, wear resistance, heat resistance, thermal conductivity, chemical resistance, water repellency, re-coating)

■Outstanding Features The greatest feature is the combination of excellent sliding properties, non-stickiness, and wear resistance. It also excels in heat resistance and thermal conductivity compared to fluororesin. Chemical resistance and water repellency are comparable to fluororesin. It can be recoated. Additionally, the substrate coated with fluororesin can be peeled off and replaced (however, if a thick film PFA or similar has been treated, it may not be peelable, so please consult us). ○Heat Resistance With a heat resistance temperature of 450°C, it can be used for high-temperature manufactured products such as pizza. ○Non-Stickiness When baked in a mold for sweets, it does not stick, allowing for beautifully shaped baked goods. ○Thermal Conductivity When baked in a takoyaki mold, its excellent thermal conductivity reduces cooking time.

Company：蒲田工業
Price：Other

others
Ceramic Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic Coating for Parts Feeders

The appropriate surface roughness and slip properties make it effective for transporting small resin products.

With an appropriate surface roughness and slip properties, it is effective for transporting small resin products. It has better slip properties than conventional fluoropolymer coatings, and the film hardness is 9H, which is about three times harder than fluoropolymer coatings. *For more details, please feel free to contact our company.

Company：ツール・テック東北
Price：Other

others
Ceramic Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine's "Ceramic Coating for Food Processing Equipment"

Attention those troubled by product stagnation and residue attachment on food processing lines! Shine will provide a solution.

We are distributing case studies on food processing equipment using the ceramic coating "Sera Armor"! We will solve issues such as product stagnation on the production line and the hassle of cleaning due to residue adhesion! 【Perfect for customers like these!】 ◎ Products are sticking together, causing stagnation on the line... ◎ Residue is adhering, making post-operation cleaning cumbersome... ◎ The fluorine coating wears off quickly, requiring re-coating... 【Contents Included】 ◆ Customer's concerns ◆ Proposal from Shine Kogei ◆ What solutions were achieved ◆ About Inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. Characteristics of the substrate to be coated (material, shape, size, etc.) 2. Purpose of coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear condition, etc.) * If possible, providing drawings would be helpful for estimating costs.

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine's Ceramic Coating Technology - Sera Armor

Case studies of problem-solving with Shine Craft's food processing equipment! Ceramic coating technology "Cera Armor" also prevents stickiness of rubber materials and noise!

We have gathered case studies of solutions using the ceramic coating "Cera Armor" in food processing equipment. We will resolve issues such as product stagnation and the hassle of cleaning due to residue adhesion in food processing environments! 【Challenges We Solve!】 Case Study 1: "Slip and Non-Stick Properties in Food Processing Equipment" Case Study 2: "Non-Stick Coating in School Meal Production Equipment" Case Study 3: "Ceramic Processing for Commercial Rice Cookers" Case Study 4: "Ceramic Processing for Pan Trays" 【Ideal for Customers Who:】 ◎ Experience product sticking and stagnation on the line... ◎ Deal with residue adhesion that complicates post-operation cleaning... ◎ Find that the fluorine coating wears out quickly and requires re-coating... ◎ Have excessive input needs to ensure production numbers due to high food adhesion... ◎ Encounter issues like burning and coating peeling, indicating poor durability! ◎ Require heat resistance in certain areas ◎ Face poor durability with coating peeling and other issues! ◎ Find that the hardness of the fluorine coating is insufficient at H to 2H!

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Kogei [Ceramic Coating for Molds]

Granting mold release and non-stick properties with Shine Kogei's "Sera Armor"!

Shine Kogei's ceramic coating "Cera Armor" has seen an increase in processing achievements for molds in recent years. Generally, when it comes to mold release processing, fluororesin coatings are the norm, but when higher durability and wear resistance are required, we recommend "Cera Armor." While fluororesin typically has a film hardness of 2-3H, "Cera Armor" boasts a high hardness film of 9H. With the extended lifespan of the coating, the ease of workpiece release is also sustained. This contributes to the efficiency of shot cycles and helps achieve cost reductions for your company. ◆ Inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. The properties of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be helpful for estimating and calculations.

Company：シャイン工芸
Price：Other

Heating and cooling equipment and facilities
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Improvement of Coating Lifespan for Food Containers

Significantly improved functionality! A case study that solved the challenges of outdoor and food container manufacturers.

We would like to introduce a case that solved the problems faced by outdoor specialty manufacturers and food container manufacturers. 【Problems】 ◆ The coating on food containers used outdoors peels off quickly. ◆ Therefore, they are looking for a surface treatment with excellent durability. 【Improvements】 Ceramic coating has excellent heat resistance (up to 300°C) and achieves higher heat resistance than fluorine coatings. With a Mohs hardness of 9H, it also boasts excellent durability, which helps to suppress the peeling of the coating when using metal spatulas. It is used in heat-resistant parts of cooking utensils and as industrial heat-resistant paint. *For more details, please refer to the PDF document or feel free to contact us.

Company：関西ポリマー
Price：Other

others
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] A Must-See for Those Struggling with Surface Treatment! Ceramic Coating

Introducing the issues we solved with our ceramic coating "DK-coat Infinity"!

The DK-coat Infinity is a ceramic coating made from a completely inorganic material that holds infinite possibilities, with no impact on the environment or human health. Unlike Teflon coatings (fluororesin coatings), it is a ceramic coating that can address the currently concerning PFAS issues. With excellent heat resistance (up to 450°C for Infinity330), it maintains non-stick properties, low friction, and wear resistance even at high temperatures (450°C), and its hard coating with a hardness of 9H significantly improves durability. <Do you have any of these concerns?> ■ Frequently scrubbing and taking a long time to clean. ■ Products are not slippery. Friction scratches appear on the products. ■ Want to heat a chemical solution to a high temperature. ■ Using strong acids or strong alkalis. *For more details, please download the PDF document or feel free to contact us.

Company：YMM コーティング事業部
Price：Other

others
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic coating suitable for precision medical devices, maintaining high purity!

Due to its excellent heat resistance, it maintains non-stick properties, low friction, and wear resistance even at high temperatures, and its 9H hardness coating enhances durability!

Ceramic coating (DK-coat Infinity) is a next-generation ceramic coating that uses only inorganic materials that are 'non-toxic and harmless,' without any organic materials. It has excellent heat resistance, maintaining non-stick properties, low friction, and wear resistance even at high temperatures, and its hard coating with a hardness of 9H significantly improves durability. 【Features】 ■ Heat Resistance Capable of withstanding high temperatures up to 450°C. Usable at temperatures above 300°C. ■ Wear Resistance With a pencil hardness of 9H, it is hard and resistant to scratching, which reduces the need for parts replacement due to wear, significantly lowering running costs. ■ Non-Stick Properties It has a high heat resistance comparable to fluoropolymer coatings (such as PTFE and PFA) and is resistant to wear and scratches, ensuring lasting non-stick properties. ■ Steam Resistance It is strong against steam, has excellent adhesion that makes it difficult for the coating to peel off, and since it is an inorganic coating, water vapor does not penetrate the coating, preventing peeling.

Company：YMM コーティング事業部
Price：Other

others
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Improved durability! Room temperature dry ceramic coating 'ERIN'

Excellent wear resistance! Rust resistance! A surface treatment that takes the environment into consideration by not using hexavalent chromium.

The room temperature dry ceramic coating "ERIN" is a new coating technology that does not use "hexavalent chromium," which is a cause of environmental pollution. It has excellent wear resistance with a thin film of 1 to 6 μm and can form a coating on various substrates such as iron, aluminum, and copper. Additionally, it does not produce outgassing in a vacuum atmosphere, and due to the room temperature processing, there is no distortion or dimensional change caused by heat. We will listen to your current concerns and provide proposals and estimates. Please feel free to contact us. 【Features】 ■ Improved wear resistance (1-3 μm) ■ Excellent thin film rust prevention capability (1-6 μm) ■ Heat resistance (−70 to 750°C: coating) ■ No distortion or dimensional change due to heat from room temperature processing ■ Coating hardness (HV 1000-1200) ■ Insulating coating

Company：豊実精工
Price：Other

others
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine's "Ceramic Coating for Resin and Engineering Plastics"

Ceramics that can form a coating on resin and engineering plastic products, enhancing wear resistance and slip properties!

Conventional fluorine coatings require high-temperature firing as a processing condition, making it difficult to apply them to resins. However, Shine Kogei's ceramic coating "Sera Armor" allows for low-temperature firing, making it possible to process heat-resistant low resin products and more. 【Ideal for customers like these!】 ◎ Dirt adheres to the material, resulting in time and cost-consuming maintenance... ◎ The material's heat resistance is low and cannot withstand the firing treatment of fluorine coatings... ◎ The durability of fluorine coatings is insufficient... ◆ Regarding inquiries ◆ When making an inquiry, it would be helpful if you could provide the following information for a smoother process. 1. The properties of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be beneficial for estimating costs and other calculations.

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine's "Providing non-stick properties to school lunch production equipment with ceramics."

Achieving prevention of food adhesion and reduction of cleaning time!

Case study of solutions using ceramic coating "Sera Armor" in school lunch production equipment! For each target part, we can select and propose coatings tailored to the entire factory, such as "PFA coating focusing on non-stick and heat resistance for rice cookers" and "PTFE coating focusing on low friction coefficient for hoppers"! 【Ideal for customers like this!】 ◎ High food adhesion requiring extra input to secure production numbers... ◎ Residue sticking, making post-operation cleaning labor-intensive... ◎ High usage frequency causing film wear, necessitating re-coating... ◆ About Inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. Properties of the substrate to be coated (material, shape, size, etc.) 2. Purpose of coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear condition, etc.) * If possible, providing drawings would be helpful for estimating and calculations.

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Craft: Ceramic Coating for Commercial Rice Cookers

Solve the weaknesses of surface hardness and durability of fluorine coatings with ceramics!

The pencil hardness of the fluorine coating is generally 3H. In production line equipment that manufactures large quantities of food daily, wear occurs quickly, and re-coating is often necessary. For those facing such concerns, we recommend Shine Kogei's ceramic coating "Cera Armor." The coating has a high hardness of 9H, excellent durability, and outstanding release properties that prevent food and other substances from sticking. 【Ideal for customers like this!】 ◎ Looking for a coating with a longer lifespan than fluorine coatings! ◎ Food materials are sticking, making post-operation cleaning time-consuming! ◎ Want heat resistance greater than fluorine coatings (approximately 500°C)! ◆ Regarding inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. The nature of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) * If possible, providing drawings would be helpful for estimating and calculations.

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic Coating for Glass Tableware by Shine Craft: Case Study

While taking advantage of the beauty of glass, it prevents food from sticking and burning!

This is a case study using the ceramic coating "Cera Armor" on glass tableware! It's especially recommended for those who want to add new value that differs from existing items and for those who have given up on processing glass due to equipment constraints. 【Ideal for the following customers!】 ◎ For those who have given up on processing materials other than metal! ◎ For those who find it troublesome to wash off food residues ◎ For those who want to preserve the appearance and texture of the material! ◆ Regarding Inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. The properties of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) * If possible, providing drawings would be helpful for estimating costs.

Company：シャイン工芸
Price：Other

Water heater Cooker IH
stone
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic Coating for Earthenware Pots by Shine Craft

Ceramic coating "Cera Armor" that is friendly to both the human body and the environment!

Shine Kogei's ceramic coating "Sera Armor" is approved under the Food Sanitation Act and by the U.S. FDA. Additionally, its antibacterial effectiveness has been confirmed through the Z-2801 antibacterial test. 【Ideal for the following customers!】 ◎ Want to impart antibacterial properties to materials! ◎ Want to prevent sticking and odor adhesion! ◎ Looking for a coating that is more durable than fluoropolymer! ◆ Regarding inquiries ◆ When making an inquiry, it would be helpful to provide the following information for a smoother process. 1. Nature of the substrate to be coated (material, shape, size, etc.) 2. Purpose of coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) * If possible, providing drawings would be helpful for estimating and calculations.

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Ceramic Coating on Carbon Materials

Enhance far-infrared effects with Shine Craft's ceramic coating!

With Shine Kogei's ceramic coating "Cera Armor," we create added value for materials. Cera Armor is approved by the Food Sanitation Act and the U.S. FDA, and its antibacterial effectiveness has been confirmed through the Z-2801 antibacterial test. It is a new era of coating technology that is friendly to both the human body and the environment. 【Ideal for the following customers】 ◎ Those who want to impart far-infrared effects to materials! ◎ Those who want to prevent sticking and odor adhesion! ◎ Those who desire durability on the surface of materials! ◆ Regarding inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. The nature of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip resistance, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be helpful for estimating costs.

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Functional Coating: Shine Craft's Sera Armor and Blue Armor

Ceramics demonstrate effects greater than fluoride! Surface treatment, which has been difficult until now, is possible with Shine's CerArmor and BlueArmor!

Shine Kogei has developed a coating material called "Cera Armor," which is primarily composed of ceramics! It possesses properties superior to fluorine and can be applied to substrates that were previously unsuitable for fluorine coatings. Please give it a try on processing substrates such as resins, engineering plastics, and glass that you may have given up on fluorine coatings! Features of "Cera Armor": ■ Can be fired at low temperatures from room temperature to 200°C ■ Usable on resin products and other materials besides metals ■ Heat resistance is over 100°C higher than fluorine coatings ■ Release and water-repellent properties are almost equivalent to fluorine coatings ■ Pencil hardness of 9H! High durability and long lifespan ★ For those seeking fluorine processing, we recommend "Blue Armor," which specializes in corrosion resistance! It protects substrates from strong acids and strong alkalis, allowing for the replacement of expensive metal piping with SS400 piping. Regular inspections are also conducted! On-site repairs can be performed as needed. Examples of "Blue Armor" applications: ■ Manufacturing equipment in petroleum plants (approximately 14 years) ■ Sulfuric acid concentration devices (approximately 6 years) ■ Reaction devices using dilute hydrochloric acid (approximately 20 years) ■ Semiconductor device components (supplied for over 10 years)

Company：シャイン工芸
Price：Other

stone
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Craft: Ceramic Coating for Resin and Engineering Plastics

Formation of a high-hardness ceramic coating on resin and engineering plastic parts through low-temperature firing by Shine Kōgei.

Conventional fluororesin coatings require high-temperature firing at 400°C, making it difficult to process materials other than metals. However, Shine Kogei's ceramic coating "Cera Armor" can form a film at low temperatures, allowing the functionality of ceramics to be imparted to materials with low heat resistance, such as resins and engineering plastics. This contributes to the long lifespan of sliding components and provides chemical resistance and corrosion prevention effects, thereby reducing total costs. 【Processing Achievements】 ■ ABS (sensor components) ■ PET (transport components) ■ PVC・POM (food equipment parts) ■ PC (electronic device housings) ■ PEEK (jigs) ■ FRP (transport equipment exteriors) ■ CFRP (roll components) ■ Glass epoxy (jigs) ■ PP, MC nylon, polyamide, etc. ◆ Regarding Inquiries ◆ When making an inquiry, it would be helpful to provide the following information for a smoother process. 1. Properties of the material to be processed (material, shape, size, etc.) 2. Purpose of processing (e.g., removal of contaminants, slip properties, peening, etc.) * If possible, providing drawings would be helpful for estimating costs.

Company：シャイン工芸
Price：Other

Heating and cooling equipment and facilities
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-stick property provided by ceramic coating.

Leave the release of molten resins and other strong adhesives to Shine Craft's "Cera Armor"!

The semi-liquid melted resin has strong adhesive energy and sticks to molds and manufacturing equipment. Generally, fluoropolymer coatings are applied, but due to the strong adhesive nature of the material, there are voices expressing that the wear and functional degradation of the coating occur quickly. In such cases, we recommend Shine Kogei's ceramic coating "Cera Armor." Thanks to its high non-stick properties and high hardness coating, users have reported that "the lifespan has increased compared to fluoropolymer coatings, and downtime due to maintenance has decreased." 【Cera Armor Coating Properties List】 1. Wear resistance (pencil hardness 9H), 2. Release properties, 3. Slipperiness, 4. Heat resistance, 5. Water and oil repellency, 6. Insulation, 7. Corrosion resistance, 8. Rust prevention, 9. Dirt resistance, 10. Antibacterial properties, 11. Far infrared effect, etc. 【Track Record of Release Properties Against Resins】 Urethane, PET, PP, Epoxy, etc.

Company：シャイン工芸
Price：Other

stone
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic Coating "SR-600 Series"

Excellent water and oil repellent colorless transparent thin film. Can be coated on metals, plastics, and more.

The "SR-600 series" is a ceramic coating that features a highly water- and oil-repellent, colorless, transparent thin film, which can be applied to metal, glass, plastic, and ceramic rubber substrates. It includes products such as "SR-610," which repels oil-based markers and allows for easy wiping even if some residue remains, as well as "SR-611" and "SR-612," which prevent adhesive tapes like cellophane tape and duct tape from sticking. Sample boards are available, and we also respond promptly to prototype requests. 【Features】 ■SR-610 - Repels oil-based markers and allows for easy wiping even if some residue remains - Strongly repels water, flowing off when tilted - General-purpose paint spray can be easily removed ■SR-611・SR-612 - Prevents adhesive tapes like cellophane tape and duct tape from sticking *For more details, please refer to the PDF materials or feel free to contact us.

Company：クリエイティブ・コーティング
Price：Other

paint
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic Coating "SR-800 Series"

High heat resistance and high hardness. Effective for high-temperature areas exceeding heat resistance temperature and for reducing friction and wear.

The "SR-800 Series" is a ceramic coating characterized by high heat resistance and high hardness. This feature is effective in high-temperature ranges that exceed the heat resistance of fluororesin, such as in the treatment of cooking pot interiors, reducing friction and wear on roller sliding surfaces, and preventing the adhesion of welding spatter. Additionally, this series allows for a variety of color tones and glossy finishes. [Features] ■ High heat resistance and high hardness ■ Effective in high-temperature ranges that exceed the heat resistance of fluororesin ■ Reduces friction and wear on roller sliding surfaces, prevents adhesion of welding spatter ■ Variety of color tones and glossy finishes *For more details, please refer to the PDF document or feel free to contact us.

Company：クリエイティブ・コーティング
Price：Other

paint
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Surface Treatment] Ceramic Coating (Deposition) (Heat Resistance, Release Properties)

Ceramic coating (deposition) (durability, heat resistance, release properties (non-stickiness))

■Outstanding Features This is a technology that produces the hardest coating. While it is often aimed at improving durability, depending on the properties of the film, it can also enhance heat resistance and release properties.

Company：蒲田工業
Price：Other

others
Ceramic Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Food Processing Solution Case] Ceramic Coating

Case studies of problem-solving in food processing equipment! Shine Kogei's ceramic coating technology "Cera Armor."

We have gathered case studies of solutions using the ceramic coating "Sera Armor" in food processing equipment. This addresses issues such as product stagnation in food processing environments and the hassle of cleaning due to residue adhesion. 【Challenges Addressed!】 Case Study 1: "Slip and Non-Stick Properties in Food Processing Equipment" Case Study 2: "Non-Stick Coating in School Meal Production Equipment" Case Study 3: "Ceramic Processing for Commercial Rice Cookers" Case Study 4: "Ceramic Processing for Pan Trays" 【Ideal for Such Customers!】 ◎ Products stick together, causing stagnation on the line... ◎ Residue adheres, making post-operation cleaning cumbersome... ◎ Fluorine coatings wear out quickly, requiring re-coating... ◎ High food adhesion necessitates extra input to secure production numbers... ◎ Issues with burning and film peeling indicate poor durability! ◎ Locations requiring heat resistance ◎ Poor durability with film peeling and other issues! ◎ Fluorine coatings lack hardness, rated H to 2H!

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic coating for food processing equipment

Attention those struggling with product stagnation and residue adhesion on food processing lines! Shine will solve your problems.

We are distributing case studies on solutions using the ceramic coating "Sera Armor" for food processing equipment! We will solve issues such as product stagnation on the production line and the hassle of cleaning due to residue adhesion! 【Ideal for the following customers!】 ◎ Products are sticking together and causing stagnation on the line... ◎ Residue is adhering, making post-operation cleaning cumbersome... ◎ The fluorine coating wears off quickly, requiring re-coating... 【Contents Included】 ◆ Customer's issues ◆ Proposal from Shine Kogei ◆ What solutions were achieved ◆ Regarding Inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. Properties of the substrate to be coated (material, shape, size, etc.) 2. Purpose of coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Operating conditions (e.g., temperature, chemicals, wear conditions, etc.) * If possible, providing drawings would be helpful for estimating costs.

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Kogei [Ceramic Coating for Commercial Rice Cookers]

Solve the weaknesses of surface hardness and durability of fluorine coatings with Shine Kogei's ceramics!

The pencil hardness of the fluorine coating is generally 3H. In production line equipment that manufactures large quantities of food daily, wear occurs quickly, and re-coating is frequently necessary. For those facing such concerns, we recommend Shine Kogei's ceramic coating "Cera Armor." The coating has a high hardness of 9H, excellent durability, and outstanding release properties that prevent food and other substances from sticking. 【Ideal for customers like these!】 ◎ Looking for a coating with a longer lifespan than fluorine coatings! ◎ Food materials are sticking, making post-operation cleaning time-consuming! ◎ Need heat resistance greater than fluorine coatings (approximately 500°C)! ◆ About Inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. The nature of the substrate to be coated (material, shape, size, etc.) 2. The purpose of the coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) * If possible, providing drawings would be helpful for estimating and calculations.

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Craft: Coating for Resin and Engineering Plastic Parts

Ceramic coatings that can be fired at low temperatures make it possible to process resin and engineering plastic parts!

Conventional fluorine coatings require high-temperature firing, making it difficult to process materials other than metals. With Shine Kogei's ceramic coating "Cera Armor," film formation can be achieved at low temperatures, significantly expanding the range of materials that can be processed, including glass and wood. 【Ideal for the following customers】 ◎ Those who have given up on coating materials other than metals! ◎ Those who face costs and effort in maintenance due to food adhesion! ◎ Those who desire a clear color coating! (Colors can also be black or white) ◆ Regarding inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. Properties of the substrate to be coated (material, shape, size, etc.) 2. Purpose of coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be helpful for estimating costs.

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Craft [Ceramic Coating for Carbon Materials]

Enhance far infrared effects with Shine Craft's ceramic coating!

With Shine Kogei's ceramic coating "Cera Armor," we create added value for materials. Cera Armor is approved by the Food Sanitation Act and the U.S. FDA, and its antibacterial effectiveness has been confirmed through the Z-2801 antibacterial test. It is a new era coating technology that is friendly to both the human body and the environment. 【Ideal for the following customers】 ◎ Those who want to impart far-infrared effects to materials! ◎ Those who want to prevent sticking and odor adhesion! ◎ Those who desire durability on the surface of materials! ◆ Regarding inquiries ◆ When making an inquiry, it would be smooth if you could provide the following information: 1. The nature of the substrate to be coated (material, shape, size, etc.) 2. The purpose of coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be helpful for estimating and calculations.

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Numerous achievements in the food industry! Ceramic coating

Eliminate food adhesion on trays and molds! It is an environmentally friendly coating material from Shine Kogei.

We have gathered case studies of solutions using the ceramic coating "Sera Armor" in food processing equipment. We will solve issues such as product stagnation and the hassle of cleaning due to residue adhesion in food processing environments! 【Challenges We Solve!】 Case Study 1: "Slip and Non-Stick Properties in Food Processing Equipment" Case Study 2: "Non-Stick Coating in School Meal Production Equipment" Case Study 3: "Ceramic Processing for Commercial Rice Cookers" Case Study 4: "Ceramic Processing for Pan Trays" 【Ideal for Customers Who:】 ◎ Experience product sticking and stagnation on the line... ◎ Deal with residue adhesion that complicates post-operation cleaning... ◎ Find that the fluorine coating wears out quickly and requires re-coating... ◎ Have high food adhesion, necessitating extra input to secure production numbers... ◎ Encounter issues like scorching and peeling, indicating poor durability! ◎ Require heat resistance in certain areas ◎ Face poor durability with issues like peeling! ◎ Find that the hardness of the fluorine coating is insufficient at H to 2H!

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shine Kogei [Ceramic Coating for Resin and Engineering Plastics]

With Shine Kōgei's "Sera Armor," inexpensive general-purpose resin transforms into a high-performance material!!

Shine Kogei's high-performance ceramic coating "Cera Armor" significantly expands the range of materials that can be processed compared to other surface treatment technologies. "Cera Armor" forms a high-hardness ceramic film through heat treatment according to the heat resistance temperature of the material. Therefore, it can be applied to materials with low heat resistance, such as resin, engineering plastics, glass, and wood. It imparts the wear resistance, slip properties, and release properties of the ceramic film to the material. It is used in resin sensor components, sliding parts, food equipment parts, and conveyor systems. ◆ Inquiries ◆ When making an inquiry, it would be helpful to provide the following information for a smoother process. 1. Properties of the substrate to be coated (material, shape, size, etc.) 2. Purpose of coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Usage conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be beneficial for estimating and calculations.

Company：シャイン工芸
Price：Other

Heating and cooling equipment and facilities
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic Coating for Shine Craft's Pantrey

Shine Kogei will solve issues such as the occurrence of burns on the pan and peeling of the coating!

Case Study of Food Processing Equipment Using Ceramic Coating "CeraArmor" 【Ideal for Customers Like This!】 ◎ Poor durability with issues like sticking and film peeling! ◎ Required heat resistance in certain areas ◆ Regarding Inquiries ◆ When making an inquiry, it would be helpful if you could provide the following information for a smoother process. 1. Properties of the substrate to be coated (material, shape, size, etc.) 2. Purpose of coating (e.g., non-stick, chemical resistance, slip properties, etc.) 3. Operating conditions (e.g., temperature, chemicals, wear conditions, etc.) *If possible, providing drawings would be beneficial for estimating purposes.

Company：シャイン工芸
Price：Other

Water heater Cooker IH
Ceramic Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ceramic Coating Product List and Ranking from 7 Manufacturers, Suppliers and Companies | IPROS

Ceramic Coating Manufacturer, Suppliers and Company Rankings

Ceramic Coating Product ranking